Divinity Beer Systems is an Upfront Merchant on TheFind. Click for info.

  Home > Beer Pumps >

FloJet Beer Pump

 
FEATURES:
  • NSF approved beer pumps are perfect for Brewery setups.
  • Great replacement for old worn-out pumps.
SPECIFICATIONS:

  • Pump Design: Positive Displacement, Double Diaphragm
  • Power Source: CO2 gas, nitrogen, compressed filter air
  • Temperature Limits: 30o - 120o F
  • Weight: 1.24 Pounds
  • 5.27" H x 3.21" W x 4.58" D
  • Gas Inlet Port: 1/4" Brass Barb
  • Outlet Ports: 3/8" Plastic Barbs
  • Self Priming up to 10 feet
  • Liquid Inlet Pressure: 30 PSI Maximum
  • Flow Rate: 5 GPM
MOUNTING
  • Pump must be located within 10 feet above the keg.
  • Pump ports must be facing down to maximize pump performance.
  • Mounting grommets are part of pump assembly, and add stability.
  • Fasten pump securely to wall or rack.
  • If using a FOB, mount it slightly above and directly after the discharge of the pump. CAUTION: if a FOB is not used, the pump will continue to cycle after the keg has emptied.
HOSE CONNECTIONS
  • All fittings are quick change.
  • Be sure the brass CO2 fitting is installed all the way and the retainer clip is engaged.
  • Use brewery approved tubing between the pump and the faucet. Allow at least two feet extra tubing to the CO2 inlet and the beer inlets/outlets to provide a service loop.
  • Secure with the appropriate clamp.
  • It is advisable to secure all hoses to prevent excessive movement.
  • If pump is installed in an enclosed area such as a closet, basement or walk-in coller, connection of a hose to the gas discharge fitting must be done to vent CO2 to the atmosphere safely. The muffler on the CO2 exhaust can be removed with pliers.
OPERATION START-UP
To start pump operation, set pressure to 15 psi and adjust up until desired flow rate is obtained. Once primed, pump will operate automatically by starting and stopping on demand, as the faucet is opened and closed. Beer flow can be adjusted by increasing or decreasing gas pressure to the pump.
WARNING
IF USED WITH CO2 OR NITROGEN BE SURE THE AREA IS WELL VENTILATED.
ONLY USE PUMP WITH SPECIFIED PRODUCTS. DO NOT PUMP FLAMMABLE LIQUIDS OR USE WHERE FLAMMABLE VAPORS ARE PRESENT.
Price: $72.32

Availability:: Usually Ships in 1 to 2 Business Days
Product Code: MP-093
Qty:

Description
 
The only pump we would ever recommend!  Built to last.

Recommended Accessories
FloJet Beer Pump - Reversal Valve FOB (Foam on beer) Detector
Price: $24.30

Add
Price: $101.64

Add
FOB empty keg sensor